Parts And Functions - Honeywell Dolphin 9900 User Manual

Parts and Functions

Top Panel
Charging Slots
There are 4 charging slots. Each slot holds one Li-ion battery and charges it independently of
the other slots. When a battery is placed in each slot, it immediately begins charging.
Charge/Analyze Slot
This is the 4th slot and the only one that can be used to analyze a battery. When a battery is
placed in this slot, it begins charging just as it does in the other three slots. However, if you
press the ANALYZE button, it runs the battery in this slot through the complete Analyze cycle.
For more information, see
Battery Capacity Indicator LEDs
These LEDs give a readout of the remaining battery capacity after it has run through a
complete analyze cycle.
For more information, see
Analyze Button
Press this button to start an Analyze cycle; see
Status LEDs
A status LED is located above each of the 4 battery slots. The color of the LED indicates the
charge status of the batteries in its slot.
Color
Green
Orange
Red
14 - 2
Status LED
Charging Slots
Using the Battery Analyzer
Battery Capacity Indicator LEDs
This color indicates that the battery in the slot...
Has completed its charge cycle and is ready for use.
Is being charged at a maximum charge rate.
Encountered an error during the most recent charge cycle.
Charge/Analyze Slot
on page 14-5.
on page
Using the Battery Analyzer
Battery
Capacity
LEDs
Analyze
Button
14-2.
on page 14-5.