Table of Contents
Advertisement
Running the BER Test
NOTE
N5980A User Guide
The User Software supports a quick pass/fail measurement, which is
generally used for testing the DUT in manufacturing. This
measurement allows you to count the number of bit errors during a
user specified gating time. The result of the measurement is
displayed as Gating Errors, Gating BER, and by a simple red (=fail)
/ green (=pass) color coding of the Gating BER bar.
1
To run the basic measurement, click on Start Gating Period or
F12.
2
In case you want to stop the running measurement, click on:
3
Once the measurement is complete, the results would appear as
follows:
The Gating Time can be modified in Advanced Mode.
Operating N5980A with the User Interface
17
Advertisement
Table of Contents
