High-Speed Data Calls (High-Speed Circuit Switched Data, Hscsd); Gsm Data Calls; Connection Manager - Nokia 9500 User Manual

C o n n e c t i v i t y

High-speed data calls (high-speed circuit switched data, HSCSD)

HSCSD is comparable to the speed of many computer modems that communicate with fixed telephone networks.
For availability and subscription to high-speed data services, please contact your network operator or service provider.
Note that sending data with HSCSD may drain the battery faster than normal voice or data calls, as the device may send data
more frequently to the network.

GSM data calls

For availability, data transfer speed and subscription to data services, contact your network operator or service provider.

Connection manager

In Conn. manager, you can view details on active network connections, and end unused connections.
Go to Desk Tools Conn.
> >
Note: The actual time invoiced for calls by your service provider may vary, depending on network features, rounding
off for billing, and so forth.
To view detailed information about network connections, select the connection from the list, and press Details. The type of
information shown depends on the network connection type.
To end a network connection, select the connection from the list, and press Disconnect.
To end all active network connections simultaneously, press Menu, and select
To view the amount of data sent and received with GPRS or wireless LAN, press Menu, and select
WLAN counter.
To view information about the IP address, press Menu, and select
when the network connection has been established, not while it is being activated.
Copyright © 2004-2005 Nokia. All rights reserved.
manager.
Tools Disconnect
>
Tools IP address. The IP address information is shown only
>
91
all.
Counters GPRS counter
>
or