Viewing Dialed, Received, And Missed Calls; Sending Dtmf Tones; Setting The Offline Profile; Diverting Calls - Nokia 9500 User Manual

T e l e p h o n e

Viewing dialed, received, and missed calls

You can view calls that you have recently dialed, received, or missed.
The phone saves missed and received calls only if the network supports these functions and if the phone is switched on and
within the network service area.
Press Recent calls, and select
To move from one dialog page to another, press Menu.
You can also view call information in the Log.
To call a number, select a call in the list, and press Call.
To remove all calls from the list, press
To save the phone number of the call in your Contacts directory, select the number in the list, and press

Sending DTMF tones

You can send DTMF (dual tone multi-frequency) tones during an active call to control your voice mailbox or other automated
phone services.
Tip: You can attach DTMF sequences to contact cards. Go to Contacts, open a contact card, press
DTMF.
To insert a pause of about 2 seconds before, or between, DTMF characters, press the p key.
To set the device to send the characters only after you press
Tip: You can also send DTMF tones by pressing the number keys. When the device cover is closed, you can press number
keys on the phone keypad to send tones.

Setting the offline profile

The offline profile prevents you from accidentally switching on your phone, using Bluetooth, sending or receiving messages,
and it also closes any Internet connection which may be in operation when the offline profile is selected. Note, however, that
the offline profile does not prevent you from establishing a new wireless LAN connection. Therefore, remember to comply with
any applicable safety requirements when establishing and using a wireless LAN connection.
Important: In offline profile you cannot make (or receive) any calls, or use other features that require GSM network
coverage. To make any calls, you must first activate the phone function by changing the profile. You may, however, be
able to make an emergency call in offline profile by pressing the power key on the cover of the device and then entering
the official emergency number. This can be done using the cover phone interface only, not the communicator interface.
If the device has been locked, enter the lock code to activate the phone function. When the device is locked, calls may
still be possible to the official emergency number.
Making an emergency call in offline profile or when the device is locked requires that the device recognizes the number
to be an official emergency number. It may be advisable to change the profile or unlock the device by entering the
lock code before you make the emergency call.
To activate the offline profile, go to Telephone, press Menu, and select
To allow full communication again, press Menu, and select
Tip: You can activate the offline profile in any application menu, or from the cover phone.

Diverting calls

You can divert incoming calls to your voice mailbox or to another phone number.
To divert voice calls, go to Telephone. press Menu, and select
Select one of the following diverting options:
Divert all calls — to divert all incoming calls
•
Divert if busy — to divert incoming calls when you have an active call
•
Divert if out of reach — to divert calls when the phone is either switched off or out of network coverage
•
Divert if not answered
•
the call in the Time delay
Tip: To activate
available, and press Change.
To check your current diverts, scroll to the diverting option, and press
Copyright © 2004-2005 Nokia. All rights reserved.
Dialled calls, Received
See "Log," p. 25.
Clear all.
— to divert calls after a certain time period. Define the time you let the phone ring before diverting
field.
Divert if busy, Divert if out of
calls, or Missed calls.
Send tone
> Offline.
Exit Offline profile
>
Settings Voice call
>
reach, and Divert if not answered
Check
23
during a call, press the w key.
> OK. Then switch on the cover phone.
diverting.
in a single action, scroll to
status.
Add to Contacts.
Add field, and select
Divert if not