Create An Internet Call Profile; Connect To The Internet Call Service - Nokia N82 User Manual

cellular phone is switched on and ready to make
calls before you attempt an emergency call. The
capability for an emergency call using internet
telephony depends on the availability of a WLAN
network and your net call provider's
implementation of emergency call capabilities.
Contact your net call provider to check the internet
telephony emergency call capability.

Create an internet call profile

Before you can make internet calls, you must create
an internet call profile.
1. Press , select
Connection
>
SIP profile, and enter the required information.
Ensure that Registration
Contact your internet call provider for the correct
settings.
2. Select Proxy server
Auto.
3. Select Back until you return to the main view of
connection settings.
4. Select Internet tel.
profile. Enter a name for the profile, and select
the SIP profile you just created.
To use the created profile for connecting to the
internet call service automatically, press
128
Tools Settings
> >
SIP settings Options
>
is set to Always
Transport type
>
Options New
> >
select Tools
>
Preferred profile.
To log in to the internet call service manually, select
Registration
type UDP or
>
creating an internet call profile.
Connect to the internet call
service
To make or receive an internet call, your device must
be connected to an internet call service. If you have
selected automatic login, your device automatically
connects to the internet call service. If you log in to
New
>
the service manually, select an available network
from the list and Select.
on.
When you are connected to an internet call service,
is shown in the standby mode.
The list of networks is refreshed automatically every
>
15 seconds. To refresh the list manually, select
Options > Refresh. Use this option if your WLAN
access point is not shown.
To select an internet call service for outgoing calls
if the device is connected to more than one service,
select Options
To configure new services, select
Configure service. This option is shown only if
, and
there are services that have not been configured.
Connectivity Internet tel.
>
When needed, and Transport
>
TCP in the SIP settings when
Change service.
>
Options
>
>