Write Text; Traditional Text Input; Predictive Text Input-Dictionary - Nokia N91 User Manual

To enter and send service requests (also known as USSD
commands), such as activation commands for network
services, to your service provider, select
command in the main view of Messag..
Cell broadcast (network service) allows you to receive
messages on various topics, such as weather or traffic
conditions from your service provider. For available topics
and relevant topic numbers, contact your service provider.
In the main view of Messaging, select
broadcast. In the main view you can see the status of a
topic, a topic number, name, and whether it has been
flagged ( ) for follow-up.
Cell broadcast messages cannot be received in UMTS
networks. A packet data connection may prevent cell
broadcast reception.

Write text

ABC, abc, and Abc indicate the selected character mode.
123 indicates the number mode.

Traditional text input

The indicator
when you are writing text using traditional text input.
40
Options
Options
is shown on the top right of the display
Copyright © 2006 Nokia. All rights reserved.
• Press a number key (
desired character appears. There are more characters
> Service available for a number key than are printed on the key.
• To insert a number, press and hold the number key.
• To switch between letter and number mode, press and
hold .
• If the next letter is located on the same key as the
present one, wait until the cursor appears (or quickly
move the joystick to the right to end the time-out
> Cell
period), and enter the letter.
• To erase a character, press
clear more than one character.
• The most common punctuation marks are available
under
punctuation mark.
Press
joystick to move through the list, and press
select a character.
• To insert a space, press
next line, press
• To switch between the different character modes,
press
Predictive text input—Dictionary
You can enter any letter with a single key press.
Predictive text input is based on a built-in dictionary to
which you can also add new words.
— ) repeatedly until the
. Press and hold
. Press repeatedly to reach the desired
to open a list of special characters. Use the
. To move the cursor to the
three times.
.
to
Select to
is shown on the