Video Sharing - Nokia N81 User Manual

Video sharing

Use Video sharing (network service) to send live video or a
video clip from your mobile device to another compatible
mobile device during a voice call.
The loudspeaker is active when you activate
sharing. If you do not want to use the loudspeaker for the
voice call while you share video, you can also use a
compatible headset.
Video sharing requirements
Because Video sharing requires a UMTS connection,
your ability to use Video sharing
network availability. Contact your service provider for
more information on the service and network availability,
and fees associated with using this service.
To use Video sharing you must do the following:
• Ensure that your device is set up for person-to-person
connections. See "Settings", p. 99.
•
Ensure you have an active UMTS connection and are
within UMTS network coverage. See "Settings", p. 99.
If you start the sharing session while you are within
UMTS network coverage and a handover to GSM
occurs, the sharing session is discontinued, but your
voice call continues. You cannot start
you are not within UMTS network coverage.
Video
depends on the UMTS
Video sharing if
Copyright © 2007 Nokia. All rights reserved.
•
Ensure that both the sender and recipient are
registered to the UMTS network. If you invite someone
to a sharing session and the recipient's device is not
within UMTS network coverage, or does not have
Video sharing installed or person-to-person
connections set up, the recipient does not know that
you are sending an invitation. You receive an error
message that the recipient cannot accept the
invitation.
Settings
Person-to-person connection settings
A person-to-person connection is also known as a Session
Initiation Protocol (SIP) connection. The SIP profile
settings must be configured in your device before you can
use Video sharing.
Ask your service provider for the SIP profile settings,
and save them in your device.
Your service provider may send you the settings over the
air or give you a list of the needed parameters.
If you know a recipient's SIP address, you can enter it on
the person's contact card. Press
open the contact card (or start a new card for that person).
Select Options > Add detail
the SIP address in the format username@domainname
(you can use an IP address instead of a domain name).
, select Contacts, and
> SIP or Share view. Enter
99