Video Sharing - Nokia N86-1 User Manual

Video sharing

Use video sharing (network service) to send live video
or a video clip from your mobile device to another
compatible mobile device during a voice call.
The loudspeaker is active when you activate video
sharing. If you do not want to use the loudspeaker for
the voice call while you share video, you can also use
a compatible headset.
Warning: Continuous exposure to high volume
may damage your hearing. Listen to music at a
moderate level, and do not hold the device near your
ear when the loudspeaker is in use.
Video sharing requirements
Video sharing requires a UMTS connection. Your ability
to use video sharing depends on the availability of the
UMTS network. For more information on the service,
UMTS network availability, and fees associated with
using this service, contact your service provider.
To use video sharing, ensure the following:
Your device is set up for person-to-person
●
connections.
You have an active UMTS connection and are within
●
UMTS network coverage. If you move outside the
UMTS network during a video sharing session, the
112
sharing stops while your voice call continues.
Both the sender and recipient are registered to the
●
UMTS network. If you invite someone to a sharing
session and the recipient's device is not within UMTS
network coverage or does not have video sharing
installed or person-to-person connections set up,
the recipient does not receive invitations. You
receive an error message that indicates that the
recipient cannot accept the invitation.
Video sharing settings
To adjust video sharing settings, select
Tools Settings and Connection
>
sharing.
To set up video sharing, you need person-to-person
and UMTS connection settings.
Person-to-person connection settings
A person-to-person connection is also known as a
session initiation protocol (SIP) connection. The SIP
profile settings must be configured in your device
before you can use video sharing. Contact your service
provider for the SIP profile settings, and save them to
your device. Your service provider may send you the
settings or give you a list of the needed parameters.
To add a SIP address to a contact:
1. Select Menu > Contacts.
2. Select the contact, or create a new contact.
3. Select Options > Edit.
Menu
>
Video
>