Puk Codes; Barring Password; Wallet Code; Configuration Settings Service - Nokia 6020 User Manual

PUK codes

The personal unblocking key (PUK)
code and the universal personal
unblocking key (UPUK) code (8
digits) is required to change a
blocked PIN code and UPIN code,
respectively. The PUK2 code (8 digits)
is required to change a blocked PIN2
code. If the codes are not supplied
with the SIM card, contact your local
service provider for the codes.

Barring password

The barring password (4 digits) is
required when using the
service. See "Security"

Wallet code

The wallet code (4 to 8 digits) is
required to access the wallet
services. For further information, see
"Wallet" p. 56.
■ Configuration settings
service
To use some of the network services,
such as mobile Internet services,
MMS, or remote Internet server
synchronization, your phone must
have the correct configuration
settings. You may be able to receive
the settings directly as a
configuration message. After
receiving the settings you must save
Call barring
p. 41.
Copyright © 2005 Nokia. All rights reserved.
them on your phone. The service
provider may provide a PIN that is
needed to save the settings. For
more information on availability,
contact your network operator,
service provider, nearest authorized
Nokia dealer, or visit the support
area on the Nokia Web site,
<www.nokia-asia.com/support>.
When you have received a
configuration message,
Configuration sett. received
displayed.
To save the settings, select
Save. If the phone requests
settings' PIN:, enter the PIN code for
the settings, and select OK. To
receive the PIN code, contact the
service provider that supplies the
settings. If no settings are saved yet,
these settings are saved and set as
default configuration settings.
Otherwise, the phone asks
saved configuration
To discard the received settings,
select Exit or Show
To edit the settings, see
"Configuration" p. 40.
is
Show >
Enter
Activate
settings?.
> Discard.
xi