AdderLink Infinity ALIF 2112T Quick Start Guide ALIF 2112T ALIF Receiver The VNC port The Infinity port Uses the standard Ethernet port on the left Uses either the Gigabit Ethernet port, or an ALIF 2112T side of the front panel and provides lower-...
Page 2
• PWR Power indicator. ALIF 2112T - rear panel Manual factory reset Use to return an ALIF 2112T unit to its default configuration. 1 Remove power from the ALIF unit. 2 Locate the small hole on the front panel, next to the left-hand Ethernet socket.
Page 3
Where the address of a unit is not known, perform a manual factory reset (see page 2) to restore the default address. Your computer must be on the same subnet as the ALIF 2112T unit. For VNC port configuration, please see the rear page...
Page 4
To download the VNC Viewer Using the VNC viewer 1 Connect the ALIF 2112T VNC port to an IP network where a 1 On a network connected computer, locate and suitable computer is available on the same subnet (please see select the VNC viewer icon ...