Changing The Door Hinging - Miele KFN 14827 SDE ed Operating And Installation Manual

Changing the door hinging

Important
Do not change the door hinging if this
appliance is to be installed
"side-by-side" with another appliance.
To change the door hinging you will
need the following tools:
– a cross-slotted screwdriver,
– a flat-bladed screwdriver,
– a selection of Torx screwdrivers,
– a spanner.
Two people are needed for
changing the door hinging.
66
Removing the door handles
^ Pull door handle a towards you. Side
section b slides back.
^ Pull side section b firmly back out of
the guides on the mounting plate.
^ Undo the 4 screws (Torx 15) in the
mounting plate, and remove the
handle.
^ Remove the cover caps from the
opposite side, and fit them into the
empty holes.