Table of Contents
Advertisement
Settings mode
Certain settings on the appliance can
only be selected in the settings mode.
How to select the settings mode and
how to change the settings is
described in the relevant section of
these instructions.
Overview of functions that can be
selected in the settings mode:
To enter or leave the settings
mode
To switch the sensor tones
on/off
(see "Switching on and off")
To confirm that the active
charcoal filters have been
changed (see "Active charcoal
filters")
To switch the safety lock on/off
(see "Switching on and off")
To change the brightness of
the temperature display
(see "The correct
temperature")
To set the water intake time for
the ice cube maker
(see "Making ice cubes")
The door alarm is automatically
disabled when the appliance is in
the settings mode. As soon as the
door is closed, the door alarm is
activated again.
Switching the sensor tones on/off
The sensor tone which sounds each
time a sensor is touched can be
deactivated.
^ Touch and leave your finger on the X
sensor.
c
^ At the same time, briefly touch the
b
On/Off sensor (without letting go of
the X sensor).
^ Leave your finger on the X sensor for
another 5 seconds until c appears in
^
the display.
^ Touch the X sensor repeatedly until b
appears in the display.
u
^ Touch the On/Off sensor.
^ By touching the X sensor, you can
now select whether the sensor tones
d
are switched on or off:
b 0: Sensor tones are switched off
b 1: Sensor tones are switched on
b –: Return to menu.
e
The old setting lights up, and your
newly selected setting flashes.
^ Touch the On/Off sensor to confirm
the new setting.
^ Touch the X sensor repeatedly until
c appears in the display.
^ Touch the On/Off sensor.
You have now left the settings mode.
Switching on and off
17
Hide quick links:
Advertisement
Table of Contents
