Miele KFN 14827 SDE ed Operating And Installation Manual page 73

^ Insert the soft-close mechanism back
into the door, starting at the right
hand side.
^ Slide the soft-close mechanism back
into the door as far as it will go
towards the appliance using a
flat-headed screwdriver.
The screw holes on the left and right
must line up perfectly.
^ First screw the soft-close mechanism
onto the appliance side, then onto
the handle side c, pushing it firmly
towards the appliance.
Changing the door hinging
^ Attach panel b to soft-close
mechanism bracket d.
^ Align bracket d to the hinge plate,
and insert pin e from above so that
the right angle fits into the recess.
^ Click cover f back into place.
Make sure that cover f fits properly so
that the door can be closed without
hindrance and the pin is protected.
^ Remove retaining clip g.
^ Replace panel b onto the soft-close
mechanism from above, clicking it
back into place first at the bottom
and then at the top.
^ Close the lower door.
73