Changing The Programme Sequence; Changing A Programme While It Is Running; To Cancel A Programme; To Interrupt A Programme - Miele T 4662 C Operating Instructions Manual

Changing a programme while it
is running
You cannot change to another
programme once a programme has
started (this prevents unintentional
alterations). If the programme selector
is altered, the words Programme cannot
be changed appear if the selector is
not turned back to the original
programme.
You will need to cancel the current
programme before you can select a
new one.

To cancel a programme

^ Press the Start/Stop button.
The items will be cooled down,
depending on how long they have
been dried for and the temperature
reached.
If you press the Start/Stop button
again during the cooling down
phase, Finish will appear in the
display.
To select a new programme:
^ Switch the dryer off with the
I-On/0-Off button.
^ Switch the dryer back on with the
l-On/0-Off button.
^ Select a different programme.

Changing the programme sequence

To interrupt a programme

^ Switch the dryer off with the
I-On/0-Off button.
To continue drying
^ Switch the dryer back on with the
l-On/0-Off button.
The programme will continue, as long
as the cooling down phase has not
been reached.
Adding or removing laundry
after a programme has started
^ Press the Door button.
^ Open the door.
,
drum when adding or removing
items. The drum could be very hot -
danger of burning.
^ Add or remove items.
^ Close the door.
To continue drying
^ Press the Start/Stop button.
The time left shown in the display may
now vary from the actual drying time.
Do not touch the back of the
23