Miele T 4662 C Operating Instructions Manual page 35

Problem
The programme
does not start and
the display is dark.
The interior drum
lighting does not
come on.
The display is in a
different language.
The Start/Stop
button light flashes
when a programme
is being selected.
The display is dark
and the light ring
around the
programme selector
is not lit up.
The Start/Stop
button light flashes
slowly.
Possible cause
No obvious cause.
The lighting switches off
automatically (to save
energy).
The lamp needs
changing.
A different language has
been selected in
"Settings J" "Language
J".
This is not a fault.
The flashing indicates
that a programme can
be started.
The display has switched
off automatically to save
energy (Stand-by mode).
The same applies to the
programme selector.
The programme selector
light goes out when the
Settings menu has been
selected.
If the problem persists,
there is a fault.
Problem solving guide
Remedy
– Is the dryer switched on?
– Is the plug correctly inserted
into the socket and switched
on?
– Is the door closed properly?
– Has the fuse or circuit
breaker tripped?
Switch the dryer off and then
on again.
Change the lamp as described
at the end of this section.
Set the language you want.
The flag symbol will guide you.
After the programme has
started, the flashing will
change to a constant light.
The display or programme
selector are lit up after
pressing a button or turning
the programme selector.
The programme selector light
lights up when a programme is
selected.
Contact the Miele Service
Department.
35