Making Ice Cubes - Miele F 1811 Vi Operating And Installation Manual

Making ice cubes

For the automatic ice cube maker to
operate, it needs to be plumbed in
(see "Mains water connection").
Before using the ice cube maker for
the first time, the reminder to change
the water filter needs to be activated
(see "Water filter: To activate the
reminder to change the filter").
Switching on the ice cube
maker
^ Make sure that the ice cube
container is correctly located
underneath the ice cube maker.
The container must be completely
shut for ice cubes to be produced.
^ Touch the On/Off sensor for the ice
cube maker so that it is highlighted in
yellow.
Once the freezer has cooled down to its
set temperature, the ice cube maker
will fill with water.
When the water has frozen, the ice
cubes will fall out of the ice cube maker
into the ice cube container.
The ice cube maker can make up to
120 ice cubes in 24 hours.
After the appliance has been switched
on for the first time it can take up to 10
hours for the first ice cubes to drop out
of the ice cube maker and collect in the
container.
30
Ice cube production is halted
automatically when the ice cube
container is full.
Do not place bottles or other items in
the ice cube maker to chill them
quickly. The ice cube maker could
become blocked and, as a result, be
damaged.
Do not use the first three containers
full of ice cubes, as the water will
have been used to rinse through the
water pipework. This also applies
when making ice for the first time
after not using the appliance for a
while.
The amount of ice cubes which the
appliance makes depends on the
temperature in the freezer. The lower
the temperature, the more ice cubes
are produced.