Changing The Position Of The Flexiclip Telescopic Runners; Food Probe; Opener; Descaling Tablets, Plastic Tube With Clip - Miele H 5681 BPL Operating And Installation Manual

Changing the position of the
FlexiClip telescopic runners
Make sure that the oven has cooled
down before moving the FlexiClip
runners.
Take care not to burn yourself on
them.
To change the position of the FlexiClip
runners:
^ Remove the FlexiClip runners from
their original position by raising them
at the front, then pulling them
forwards and out.
^ Refit them on the required shelf level;
see "Fitting the FlexiClip telescopic
runners".

Food probe

This appliance is supplied with a
wireless food probe.
The food probe is stored in a holder in
the door when not in use.
Replace the probe in its holder after
each use. Make sure that it is
inserted into the holder correctly as
otherwise it could be damaged
when the door is closed.
Please refer to the separate "User
instructions" booklet supplied with the
oven for information on how to use the
food probe.

Opener

This opener is used to remove the lamp
covers in the sides of the oven.
Descaling tablets, plastic tube with
clip
These are required for descaling the
appliance.
Features
19