Switching The Buzzer On And Off - Miele G 673 Operating Instructions Manual

Additional options and functions
Switching off the buzzer
A buzzer sounds to indicate the end of
the rinse programme. You can switch
this buzzer off.
To switch off the buzzer proceed as
follows:
Open the door.
Switch off the dishwasher.
Press and hold the touch pads
d
and and at the same time switch
on the dishwasher.
The "On" indicator light comes on
and the k and
flash.
Warning: If some other indicator light
flashes switch off the dishwasher and
start again.
The following indicator lights can come
on in addition to the "On" indicator light:
b
– The drying heat is switched off.
e
– The buzzer is already switched
off.
f
– Special function for the Service
Engineer only.
44
b
c
indicator lights
Press touch pad
e
lights up. The buzzer is now
switched off.
Press touch pad 2, the 2 indicator
lights up and the k indicator
flashes. The indicator lights
c
go out. Indicator lights
also go out if these have been on
previously.
Press touch pad 2 once again. Indi-
cator lights 2 and k flash.
Switch off the dishwasher. Cancella-
tion of the buzzer is now stored in
memory.
The buzzer will not sound at the end
of the rinse programme.
Switching on the buzzer
In order to switch the buzzer back on,
follow the same procedure.
The indicator light in touch pad
out if it was pressed.
e
. The indicator light
e
and
b
and
e
goes
f