Adjusting The Door Front; Securing The Door Front - Miele G 673 Operating Instructions Manual

Installation

4. Adjusting the door front

When fitted the door front can be ad-
justed up to a maximum of 2 mm up-
wards or downwards to match adjoin-
ing base unit fronts.
Adjust the height of the door front
with the lower recessed adjusting
screw (Torx T20) at each side of the
machine door outer panel.
higher = turn clockwise.
lower = turn anti-clockwise.
72

5. Securing the door front

Secure the door front by tightening
the upper recessed fixing screws
(Torx T20) at each side of the
machine door outer panel.
Plug the fixing screw recesses with
the plastic stoppers provided.