Switching On And Off - Miele G 673 Operating Instructions Manual

Switching on and off

Switching on and off
Switching on
Open the door.
Open the stopcock (if it is closed).
Press the "I" (On) touch pad (20).
The "On" indicator light comes on.
Starting a programme
Press the touch pad for the required
programme.The indicator light
comes on in the touch pad pressed.
If required select "Top solo" (2) be-
fore starting the programme.
(see section "Additional options and
functions").
Close the door. The programme
starts.
38
For information
The "Reactivation" process is car-
ried out before a wash programme.
It lasts several minutes.
The hardness level of the inlet water
dictates how often (after how many pro-
grammes) water needs to be softened.
For example with a water hardness de-
gree of 380 mg/l (21 °d German scale)
reactivation takes place after every 3
programmes. With a water hardness de-
gree of 140 mg/l (8 °d German scale)
reactivation takes place after 8 pro-
grammes.
Do not cancel the programme pre-
maturely, as important programme
steps such as preparing the water
softener may be left out.
Programme end
A buzzer sounds at the end of the pro-
gramme cycle.
This buzzer is then repeated for one
hour at ten minute intervals.
You can switch this buzzer off (see sec-
tion on "Additional options and func-
tions").