Miele H 4540 Pyrolytic Operating Instructions Manual page 52

Cleaning and care
Stainless steel fronted
appliances
The appliance front and controls are
susceptible to scratches and abrasion.
Please observe the cleaning
instructions for
– stainless steel surfaces,
– stainless steel coloured controls.
Stainless steel surfaces
Stainless steel surfaces can be cleaned
using a Miele E-Cloth or a proprietary
non-abrasive cleaning agent designed
specifically for use on stainless steel
(do not use stainless steel cleaners on
the controls).
Avoid:
– cleaning agents containing soda,
acids or chlorides,
– abrasive cleaning agents, e.g.
powder cleaners and cream cleaners,
– abrasive sponges, e.g. pot scourers or
sponges which have been previously
used with abrasive cleaning agents.
To help prevent re-soiling, a proprietary
conditioning agent for stainless steel
can also be used.
Apply sparingly with even pressure
using a soft cloth following the direction
of the grain.
52
Stainless steel coloured controls
The controls may suffer discolouration
or damage if soiling is left on them for
too long.
Remove any soiling straight away.
Avoid:
– cleaning agents containing soda,
acids or chlorides,
– abrasive cleaning agents, e.g.
powder cleaners and cream
cleaners,
– abrasive sponges, e.g. pot scourers
or sponges which have been
previously used with abrasive
cleaning agents,
– stainless steel cleaners,
– oven sprays.
If you are unsure about a particular
product or need further advice please
contact your nearest Miele Sales
office. See back page for address.