Table of Contents
Advertisement
Installing built-under "U" model dishwashers
3. Calculate the decor panel
height
The height of the dishwasher front
panel can be adjusted to match
neighbouring kitchen units. To do this
you will have to trim the decor panel,
the filler card underneath it and the
decor frame strips to size.
If you wish you can fit a decor panel to
match your kitchen furniture instead of
the one supplied with the machine. To
do this you will need a new decor panel
cut to the correct size (see "Calculating
the height of a new decor panel"
section on the next page).
Before calculating the height of the
decor panel you must first set the
dishwasher to its correct height (see
step 2 "Building the dishwasher into its
niche").
Measurement X equals the distance
from the lower edge of the dishwasher
door to the lower edge of an adjacent
kitchen unit door front.
The decor panel supplied with the
dishwasher is 604 mm high. To match
the height of the panel supplied or
create a new decor panel this
measurement needs to be shortened
by dimension X.
27
Hide quick links:
Advertisement
Table of Contents
