Table of Contents
Advertisement
Installing built-under "U" model dishwashers
Dishwasher height
^ Adjust the height of the dishwasher
manuually before installing the
dishwasher.
Leave a space of approx. 5 mm
below the worktop to allow the
dishwasher to be pushed back easily
into the recess. Make sure that the
dishwasher stands level.
It is easier to adjust the screw feet if the
weight of the dishwasher is not bearing
down on them.
If possible tip the machine slightly.
Slides
You will find the slides in the upper
basket of your dishwasher.
They make installation of the
dishwasher easier and protect the floor
from possible damage when moving
the appliance into and out of the
recess. They are also used for
adjusting the height of the rear screw
feet.
^ Fit the slides - with the ratchet at the
rear - under the screw feet.
The angle connector for the water
drainage hose at the rear of the
dishwasher can be turned.
^ Turn the angle connector in the
direction of the on-site connection for
the drainage hose.
^ Push the dishwasher right back into
the recess. Ensure that the drain
hose, inlet hose and the electric
cable are laid to reach the
connection point without any kinks.
25
Hide quick links:
Advertisement
Table of Contents
