Miele H 255 Operating Instructions Manual page 62

Electrical connection
Electrical connection of the
appliance should be undertaken by
a qualified electrician in strict ac-
cordance with national and local
safety regulations.
Caution:
In order to avoid a hazard this ap-
pliance must be installed according
to these instructions for installations.
Fusing arrangements must be accord-
ing to national and local standards.
Connection should be made via a suit-
able isolator switch which complies
with national and local regulations. It
should be easily accessible for servic-
ing work.
The data plate gives the necessary
cording to national and local stand-
ards.
When contacting the Service Depart-
ment, please quote the voltage, model
and serial numbers given on the data
plate.
Test certificates awarded . . . . . . . . . . .
. . . . . . . . Electrical Safety, C-Tick Mark
Electrically suppressed acc. to . . . . . .
. . . . . . . . . . . . . . . . . . . . . AS/NZS 1044
62
@
@
, which must be ac-
The wall oven is suitable for connection
to an a.c. single phase 240 V, 50 Hz
electricity supply.
The fuse rating is 16 A.