Problem
The In-operation
indicator is flashing
quickly.
The buzzer is sounding.
One of the following
messages appears in
the display:
Technical fault! Switch the
appliance off, turn off the
water supply and call the
Service Department.
Waterproof fault F70
Fault with auto. door
closing
Fault with auto. door
opening
Possible cause
There may be a
technical fault.
The Waterproof system
has reacted.
The door is sometimes
obstructed by an item
inside the appliance.
There may be a
technical fault.
Problem solving guide
Remedy
– Clean the water inlet and
clean the drain pump and
non-return valve as
described in
"Maintenance". If this does
not resolve the problem:
– switch the dishwasher off
with the Off button V.
After a few seconds:
– Switch the dishwasher on.
– Select the programme you
want.
– Close the door.
If the fault message appears
again, there is a technical
fault.
– Call the Service
Department.
– Close the stopcock.
– Call the Service
Department.
– Remove the obstruction.
– If this is not the case, call
the Miele Service Dept.
– Open the door manually.
– Call the Service
Department.
49