Problem Solving Guide; Problem - Miele G 1270 Operating Instructions Manual

Problem solving guide

With the aid of the following guide, minor problems can be easily corrected
without calling in a Miele service technician, saving you both time and money.
The following guide may help you to find the reason for a fault, and to correct it.
You should, however, note the following:
,
Repairs should only be carried out by a suitably qualified and trained
person in accordance with current local and national safety regulations.
Unauthorised or incorrect repairs could cause personal injury or damage the
appliance.
Technical problems

Problem

The appliance does
not start.
The dishwasher
stops during a
programme.
After the programme
has started, the
In-operation indicator
light is not visible.
46
Possible cause
The door is not properly
closed.
The appliance is not
plugged in.
The fuse is defective or
has tripped.
The appliance is not
switched on.
The fuse is defective or
has tripped.
The reflector panel was
not correctly fitted.
Remedy
Push the door firmly shut.
Insert the plug and switch on
at the socket.
Reset or replace the fuse.
Press the On button g and
select a programme.
Reset or replace the fuse.
Re-fit the reflector panel
correctly (see Installation
diagram).