Table of Contents
Advertisement
Creating the Firmware Floppy Disks
Controller firmware is available two ways:
From the controller installation CD—The CD includes the IFU
executable,
multiple UFI files.
You can locate the necessary files on the controller installation
CD at the locations listed below.
ICP Model
ICP9014RO
ICP9024RO
From the ICP Web site—When you download a new firmware
file, you usually get the most recent version of IFU.
To create the firmware floppy disks:
1 Create a bootable MS–DOS floppy disk and copy the following
files to this disk:
– IFU.exe
– AAxxx01.ufi
where
is the model number of your controller.
xxx
2 Create additional bootable MS–DOS floppy disks and copy each
additional
AAxxx0x.ufi
have two UFI files; others have four.)
3 Start the IFU as described in
page C-4
and follow the prompts.
. The flash image may be comprised of
IFU.exe
Path
/packages/firmware/ICP9014RO
/packages/firmware/ICP9024RO
files to a separate disk. (Some controllers
Running the IFU from the GUI on
ICP Flash Utility (IFU)
C-3
Advertisement
Table of Contents
