Table of Contents
Advertisement
System Requirements and Compatibility
This section summarizes the following system requirements:
Drive Requirements
Hardware Requirements
Operating System Compatibility
Drive Requirements
You need to have enough drives available for the RAID array level
you want to build. For details, see
Note: Arrays work best when all array members (drives) are
identical.
Hardware Requirements
The following list summarizes the hardware requirements:
Intel Pentium, or equivalent, processor
A motherboard that meets the following compatibility
requirements:
– Complies with the PCI Local Bus Specification, Revision 2.2
and higher.
– Supports multifunction devices where one of the devices is a
PCI bridge.
– Provides large memory-mapped address ranges.
Refer to the
motherboard compatibility information.
At least 128 MB of RAM
An available 3.3 Volt 32- or 64-bit PCI or PCI-X slot
20 MB of free drive space
16-bit SVGA color monitor with a resolution of at least 800 x 600
CD drive
file on the installation CD for additional
Readme
Appendix E, About
Introduction
RAID.
1-3
Advertisement
Table of Contents
