SCSI Configuration Options
To access the SCSI Device Configuration options, select SCSI
Configuration.
SCSI Channel Interface Definitions
The SCSI Channel Interface Definitions are described in the
following table.
Option
Controller SCSI
Channel ID
SCSI Parity
Checking
Controller SCSI
Channel
Termination
Default
Description
7
Sets the controller's SCSI ID. ICP
recommends that you leave the controller set
to the default, which gives it the highest
priority on the SCSI channel.
Enabled
Determines whether the controller verifies
the accuracy of data transfer on the SCSI
channel. You should only disable SCSI Parity
Checking on the controller and all SCSI
devices if any SCSI device supported by the
controller does not support SCSI parity;
otherwise, retain the default. Most SCSI
devices do support SCSI parity. If you are not
sure whether a device supports SCSI parity,
consult the documentation for the device.
Auto
Sets termination on the controller. ICP
Mode
recommends that you retain the default
setting.
ICP RAID Configuration Utility
A-12