Table of Contents
Advertisement
Use the appropriate selector to choose
the microwave power setting and the
time. It does not matter which is chosen
first.
^ Turn the power selector to the re-
quired setting. The symbol for micro-
wave h lights up in the display, 0:00
flashes.
^ Set the required time using the time
selector. Any time of between 5 sec-
onds and 60 minutes can be se-
lected.
^ Press the START button to start the
process.
The interior lighting comes on.
A process can only be started if the
door is closed.
22
Programmes can be interrupted and
re-started at any time.
^ To
a process, press the
Stop/C button once or open the ap-
pliance door.
The time stops counting down.
^ To
the process, close the
door and press the START button.
The process continues.
If you discover after starting a process
that
. . . the
too high or too low, you can
^ select a new setting.
. . . the
set is too short or too long,
you can
^ interrupt the process (press the
Stop/C button once), use the time se-
lector to set a new time and continue
the process (press the START but-
ton).
Press the Stop/C button twice.
An audible tone will sound when the
cooking process is complete. The oven
interior lighting goes out.
is
Hide quick links:
Advertisement
Table of Contents
