Turntable; Starting A Process - Miele M 638 EC Operating Instructions Manual

The duration and end of a process can
be pre-programmed. This applies to
any method of operation your appliance
offers.
^ Proceed as for starting a process.
^ However at the end do not press the
START button. Instead press the m
button.
The time of day will flash in the dis-
play (The programme duration is au-
tomatically added).
^ Use the rotary selector the time you
wish the process to finish. The h
symbol flashes, the end time, the
symbols for the method of operation
selected and r as a symbol for a
programmed end of cooking time will
light up.
^ Press START.
r and the time of day will light up in
the display.
The appliance will switch on automati-
cally and then off at the selected end of
cooking time.
If the end of cooking time is pro-
grammed for microwave operation
make sure that there is food in the
oven.
24
It is possible to check the end of cook-
ing time before a programmed process
has started.
^ Press the m button. The selected
method of operation and the pre-se-
lected end time will appear.
If the dish extends beyond the size of
the turntable it might not turn around in
the oven. If this is the case the turntable
must be switched off.
^ Press ä.
^ Press the Start button again after
closing the door. The appliance will
then start at the pre-selected time.
^ Press the Stop/C button and
programme the times in again.
^ Press the Stop/C button.