Miele H 135 MB Operating Instructions Manual page 74

Microwave compact oven
Table of Contents

Advertisement

All electrical work should be carried out
by a competent person, in accordance
with national and local safety regulations.
Depending on the version, the ap-
pliance is supplied with a mains cable,
or a mains cable and plug for connec-
tion to a.c. 50 Hz, 230 -240 V.
The voltage, rated load and fuse rating
are given on the
the front of the oven interior. Please en-
sure that these match the household
mains supply.
For extra safety it is advisable to install
a residual current device (RCD) with a
trip current of 30 mA.
For appliances with a rated load above
3000 W connection should be made
via a suitable isolator which complies
with national an local regulations, and
which is accessible after the appliance
has been built in.
Connection for appliances with a rated
load of 3000 W or less should be made
via a fused plug and a suitable
switched socket which is easily ac-
cessible.
In certain unfavourable circumstances
microwave appliances can be a source
of interference. In this event please con-
tact your dealer or the Miele Service
Dept.
74
situated at
As the colours of the wires in the mains
lead of this appliance may not corre-
spond with the coloured markings ident-
ifying the terminals in your plug, pro-
ceed as follows:
The wire which is coloured green and
yellow must be connected to the termi-
nals in the plug which is marked with
the letter E or by the earth symbol
or coloured green or green and yellow.
The wire which is coloured blue must
be connected to the terminal which is
marked with the letter N or coloured
black.
The wire which is coloured brown must
be connected to the terminal which is
marked with the letter L or coloured red
(U.K).
The wires in the mains lead are col-
oured in accordance with the follow-
ing code:
Green / yellow = earth
Blue = neutral
Brown = live
WARNING
THIS APPLIANCE MUST BE
EARTHED

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents