Advertisement
The operating hours counter for the
grease filter is set to 30 hours. This
time can be lengthened or shortened.
You can choose from 20, 30, 40 or 50
hours.
You can set the operating hours
counter to suit the type of cooking you
do.
Select a short time if you roast or fry a
lot.
If you use very little fat for cooking, se-
lect a longer time.
If, however, you only cook occasionally
we recommend that you select a short
time because grease which has built
up gradually over a long period of time
will harden on the grease filters and
make cleaning more difficult.
– Use the On/Off touch control to
switch the fan off.
– Press the run-on option touch control
and the grease filter touch control at
the same time.
The indicator lamp for the grease filter
touch control and one of the lamps
above the power level touch control will
flash.
The power level touch control lamps
show the time which has been set:
1st lamp from left = 20 hours
2nd lamp from left = 30 hours
3rd lamp from left = 40 hours
4th lamp from left = 50 hours
– Use the power level touch control to
select the desired time.
– Confirm the procedure by pressing
the grease filter touch control.
If the procedure is not confirmed
within 4 minutes of programming
the steps, the cooker hood will auto-
matically revert to the "old" data.
13
Advertisement
