Changing A Programme - Miele T 253 C Operating Instructions Manual

Anti-crease/Finish
Hand iron Machine
iron
This is not a fault.
The electronic unit has
recognised that there is no
laundry in the drum and
cancelled the programme.
Drying individual garments
or items which are already
dry can also cause the
programme to be stopped.
No obvious cause.
Use the "Timed drying -
Warm air" programme to
dry individual items.
Before changing a
programme: Open and
close the drum door.
– Switch the dryer off and
then on again.
– Then start the
programme again.
If the programme stops
again and the fault
message reappears there
is a fault. Contact the
Miele Service
Department.
31