Accessories Supplied - Miele S 858 Operating Instructions Manual

Using the standard floorhead
(standard or optional accessory
depending on country)
This floorhead can be used for all
normal cleaning of carpets and rugs.
It can also be used with the brush
protruding to vacuum hard flooring. For
hard flooring, such as stone and
parquet, we recommend using one of
the special Miele floor brushes (see
"Accessories available as optional
accessories).
It is also important to observe the
flooring manufacturer's cleaning and
care instructions.
Fitting the standard floorhead
^ Push the suction tube into the
floorhead and turn it clockwise or
anti-clockwise until it clicks into
position.
^ To release the floorhead from the
suction tube, press the locking button
(see arrow in top illustration) and pull
the suction tube away from the
floorhead.
Adjusting the standard
floorhead
Vacuum carpets and rugs with the
brush retracted:
^ Press the foot switch to the ö position.
Clean hard flooring which is not
susceptible to scratching with the brush
protruding:
^ Press the foot switch to the ä position.

Accessories supplied

13