Building Under; Aligning The Appliance To Taller Unit Doors - Miele KWT 4154 UG-1 Operating And Installation Manual

^ Align the appliance to the height of
the niche by altering the adjustable
feet using the spanner supplied.
^ Push the appliance into the niche.
When doing this, make sure that the
mains cable does not get trapped.
Make sure that the socket and
On-Off switch are easily accessible
after the appliance has been
pushed underneath the worktop.
Make sure that the ventilation gaps in
the plinth are at least 300 cm
warm air can disperse unhindered.
Otherwise the appliance has to work
harder, resulting in an increase in
electricity consumption.
Aligning the appliance to taller
unit doors
If the neighbouring kitchen unit doors
a are taller than the wine cooler door,
the wine cooler can be aligned to the
unit doors using a filler panel b.
When using a filler panel a cut-out of
12 mm x 45 mm is required on the
hinged side.

Building under

2
so that
33