Download Print this page

Miele EGW 601-14 Operating And Installation Manual page 17

Built-in plate warmer

Advertisement

This appliance is supplied with a 3-core
cable (approx. 1.5 m long) for connec-
tion to a single phase 230-240 V 50 Hz
supply.
The wires in the mains lead are col-
oured in accordance with the following
code:
Green/yellow = earth
Blue
= neutral
Brown
= live
In other countries check these details
with your supplier.
The electrical safety of this appli-
ance can only be guaranteed when
continuity is complete between the
appliance and an effective earthing
system, which complies with local
and national regulations. It is most
important that this basic safety re-
quirement is tested by a qualified
electrician. The manufacturer cannot
be held responsible for the conse-
quences of an inadequate earthing
system (e.g. electric shock).
Data relating to electrical connection
will be found on the data plate located
beside the control panel. Make sure
that these figures comply with the main
voltage. Connection should be made
via a suitable isolator which complies
with national and local regulations.
The appliance is supplied with a 3-core
cable for connection to a 230-240 volt
50 Hz supply.
The wires are coloured in accordance
with the following code:
Green/yellow = earth
Blue
= neutral
Brown
= live
17

Advertisement

loading