Operation; To Switch The Fan On; Selecting A Power Level; Intensive Setting - Miele DA 439 Operating And Installation Manual

To switch the fan on

^ Press the On/Off touch control.
The fan will come on at power level lI.
The indicator light comes on.
If the cooker hood has been
connected to a window contact
switch via the Miele Control module
DSM 400, then the fan cannot be
switched on if the window is shut.
The indicator lamp will flash.

Selecting a power level

^ Use the – / + controls to select the
power level required.
Touch control + = higher setting
Touch control – = lower setting
Depending on the intensity of the
cooking vapours, levels I to III (green
indicator lamps) are usually sufficient
for normal cooking.

Intensive setting

When frying or cooking food with a
strong aroma, you may wish to select
the Intensive setting (yellow indicator
lamp) for a short period.
Automatic switch-off of the Intensive
setting
You can set the Intensive setting so that
it only runs for 10 minutes before
reverting automatically to level III.
^ To set this option, both the fan and
the hob lighting must be switched off.
^ Press the run-on option touch control
for approx. 10 seconds. The first fan
setting indicator will light up.
^ Press in turn
- the right-hand touch control for the
lighting,
- the – touch control, and
- finally the right-hand touch control for
the lighting again.

Operation

13