Table of Contents
Advertisement
Electrical connection
All electrical work should be under-
taken by a competent person in
strict accordance with national and
local safety regulations.
Connection of this appliance should be
made via a suitable isolator which com-
plies with national and local regulations
and which is accessible after the ap-
pliance has been built in.
The
are given on the data plate. Please en-
sure that these match the household
mains supply.
Please quote these data and the model
and serial number when contacting the
Miele Service dept.
For extra safety it is advisable to install
a residual current device with a trip cur-
rent of 30 mA.
The appliance is supplied with a 3-core
cable for connection to a 230 - 240 volt
50 Hz supply.
The wire are coloured in accordance
with the following code:
Green/yellow = earth
Blue = neutral
Brown = live
18
Q\}
If the connection requires a different
cable, the Miele Service dept must
be consulted.
See the data plate for the maximum
rated load.
The hob control units may only be com-
bined with one of the hobs listed below,
(not all units are available in every
country).
KM 240
KM 242
KM 243
KM 245
KM 246
KM 247
KM 248
KM 251
KSE 202-1
KSE 204-1
Advertisement
Table of Contents
