Miele DA 422-4 Operating And Installation Manual page 25

3 protective sheets
for use when fitting the tower.
1 exhaust connection for exhaust
ducting C 150 mm.
1 reducing collar
for exhaust ducting C 125 mm.
1 non-return flap
for fitting into the exhaust connection
on the motor unit (not needed for
recirculation mode).
Telescopic wall bracket
for securing the cooker hood to the
wall.
8 screws 5 x 40 mm and
8 x S 8 plugs for securing the wall
bracket.
,
The screws and plugs are
designed for use in solid walls only.
For other types of wall construction,
alternative fixings will be required.
Make sure that the wall is able to
take the weight of the cooker hood.
2 x M 6 self-tapping nuts
for securing the appliance.
2 screws 3.9 x 7.5 mm
for securing the tower.
1 lever
for dismantling the tower.
Installation instructions
Installation
25