Table of Contents
Advertisement
Final spin speed
Programme
Cottons
Minimum iron
Delicates
Woollens
Proofing
Express 20
Automatic plus
Dark garments / Denim
Shirts
Intensive plus
Spin
Separate rinse/Starch
You can reduce the final spin speed.
However, you cannot select a final spin
speed higher than that shown in the
chart above.
Rinse and interim spin
There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the
interim spin speed. If a spin speed of
less than 700 rpm is selected for a
Cottons programme, an additional rinse
is introduced.
To omit the final spin (Rinse hold)
^ Select the Rinse hold (
rpm
using the Spin speed button. The
1400
laundry will not be spun and will
1200
remain suspended in the final rinse
600
water. This reduces creasing if the
1200
laundry is not going to be removed
from the drum immediately after the
1000
end of the programme.
1400
1200
– To start the final spin:
1200
The washing machine will display the
600
maximum spin speed possible. You
can select a spin speed lower than
1400
this. Start the final spin by pressing
1400
the Start/Stop button.
1400
– To end the programme:
Press the Door button. The water will
drain away. Press the Door button
again to open the door.
To omit rinse and interim spin and
the final spin (No
^ Select the No
Spin speed button.
The laundry is not spun after the final
rinse. The water will drain away and the
machine will go straight into the
anti-crease stage.
With some programmes an additional
rinse is introduced if this setting is
selected.
Spinning
) setting
)
setting using the
19
Hide quick links:
Advertisement
Table of Contents
