Cleaning and care
Pan supports, ring support
Caution: the pan supports and the
ring support become hot in use.
The pan supports can be removed for
cleaning:
lift the support up at the back and
out of the holders at the front.
The pan supports and ring support can
be cleaned in a hot solution of washing-
up liquid.
Never use scouring agents as these
could scratch the surface.
Dry with a cloth.
Cleaning and care
Hob trough
Avoid allowing liquids or foods con-
taining salt to spill on to the stain-
less steel hob. Should this happen
wipe up any spillages immediately.
Otherwise discolouration could
occur.
Remove dust, oils and fats, spillages of
foods and condensed water from pots
and pans immediately to prevent it
drying on. Dried on food residues are
easier to remove if they are first soft-
ened with warm water.
Clean the hob trough using hot water
with a little washing up liquid added.
Do not use any scouring agents or
pads, knives or hard brushes.
These will cause scratching.
Do not use cleaning agents contain-
ing acids. A proprietary cleaning
agent for stainless steel can be
used on the stainless steel hob
trough.
Facia panel / Control knobs
Do not use any scouring agents or
pads on the knobs or facia, as
these could cause damage.
Clean the hob controls and the facia
panel with hot water and a little wash-
ing up liquid.
After application rub dry with a clean
cloth.
13