Electrical Connection And Technical Data - Miele KM 83-2 Operating Instructions Manual

Electrical connection and technical data

Electrical connection and technical data
Electrical connection
General notes
Electrical connection of the appliance
should be undertaken by a suitably
competent person in strict accordance
with national and local safety regula-
tions.
For extra safety it is advisable to install
a residual current device (RCD), with a
trip current of 30 mA.
Electrical connection U.K. / IRL / ZA
The appliances are supplied with a
mains cable for connection to an a.c.
supply:
240 V 50 Hz fpr U.K.,
230 V 50 Hz for IRL / ZA.
See the data plate for rated load.
Connection should be made by a fused
plug and switched socket. The On-Off
switch should be easily accessible
after the appliance has been built-in.
16
Electrical connection U.K.
Important:
The wires in the mains lead are col-
oured in accordance with the following
code:
Green/yellow = earth
Blue = neutral
Brown = live
As the colours of the wires in the mains
lead of this appliance may not corre-
spond with the coloured markings ident-
ifying the terminals in your plug, pro-
ceed as follows:
The wire which is coloured green and
yellow must be connected to the termi-
nal in the plug which is marked with the
letter E or by the earth symbol z or col-
oured green or green and yellow.
The wire which is coloured blue must
be connected to the terminal which is
marked with the letter N or coloured
black.
The wire which is coloured brown must
be connected to the terminal which is
marked with the letter L or coloured red.
WARNING
THIS APPLIANCE MUST BE
EARTHED
Non-rewireable plugs BS 1363 (U.K.)
If this machine or appliance is fitted
with a non-rewireable plug, the follow-
ing information applies: