Table of Contents
Advertisement
Description of the appliance
KM 81-2
b
Trivet
c
Wok/pan support
d
Small burner cap
e
Large burner cap
f
Burner collar ring
g
Large burner cap base
h
Ignitor
i
Cable for connection
to electrical supply approx. 3.6 ft
(1.10 m) long.
j
Ignition safety control
k
Burner base
l
Control for burner
m
Control panel
Description of the appliance
Data plate
Because the data plate is no longer
visible once the appliance has been
built in, a 2nd data plate is supplied
which should be placed into the space
provided in these instructions under
"After Sales Service".
Special accessories
Special accessories are available from
your Miele Dealer or from the Spare
Parts Department.
Stainless steel cover-EA 80
A stainless steel cover is available for
the KM 81-2 hob. Check availability in
each country.
For installation of the cover, a minimum
distance of 650 mm is required be-
tween the work surface and wall units.
Note:
The wok/pan support should be
removed before the cover is closed
down over the hob.
Do not install the DA 8-2 directly
next to the gas hob.
3
Advertisement
Table of Contents
