Table of Contents
Advertisement
Conversion to alternative types of gas
Conversion to alternative types of gas
The appliance is set up for natural gas.
When converting to alternative
types of gas (LP gas), (or back to
Natural gas), the main jet and the
small jets of the burner must be
changed. (Check with your dealer if
this option is available in your
country).
Turn off the gas main (if this ap-
pliance has already been installed),
turn off the electrical supply and
pull out the plug if fitted.
Remove the wok/pan support, the
large burner cap, the burner collar
ring and the large burner cap base.
With a suitable cross head screw-
driver, unscrew the three screws.
Pull the controls for the gas burner
up and off.
Carefully raise the hob cover slightly
at the rear and pull forward. Then
carefully lift upwards and forwards.
Ensure that the earth lead which con-
nects the hob and the control panel
is not damaged.
Screw in the new jets acccording to
the table.
26
for U.K.
Natural gas
Liquid gas
The jet marking refers to 1/100mm of
the jet orifice.
Main jet
Small
Ø
jet
Ø
1.70
0.74/0.36
Nr. 34
1.12
0.52/0.23
Nr. 7
Advertisement
Table of Contents
