Advertisement
Cleaning and care
Before any cleaning or maintenance
work, disconnect the cooker hood
from the mains supply. Ensure that:
– it is switched off at the wall socket
and the plug has been withdrawn
(do not pull on the cable, only on
the plug), or
– the fuse has been withdrawn from
the fused spur connection unit, or
– the mains fuse is withdrawn, or
– the screw-out fuse is removed (in
countries where this is applicable).
Warning: The surfaces and controls
are susceptible to scratches and ab-
rasion. Please observe the following
cleaning instructions.
All external surfaces and controls
can be cleaned using warm water
with a little washing up liquid applied
with a well wrung out soft sponge or
cloth.
Wipe dry using a soft cloth.
Avoid:
– cleaning agents containing soda,
acids or chlorides,
– abrasive cleaning agents e.g. pow-
der cleaners or cream cleaners, and
abrasive sponges, e.g. pot scourers
or sponges which have been pre-
viously used with abrasive cleaning
agents. These will damage the sur-
face material.
12
The re-usable metal grease filter in the
appliance removes solid particles from
the kitchen vapours (grease, dust, etc)
preventing soiling of the cooker hood.
Clean the grease filter when it looks
dirty, and avoid letting it become so
dirty that the filtering effect is inefficient.
To avoid a build-up of fat, it should be
cleaned every 3-4 weeks on average,
but sooner if necessary.
An over saturated filter is a fire
hazard.
Hide quick links:
Advertisement
