Auto Heat-Up - Miele KM 530 Operating And Installation Manual

Auto heat-up

When Auto heat-up has been activated,
the cooking zone switches on
automatically at the highest setting and
then switches to the continued cooking
setting which you have previously
selected. The heat-up time depends on
which continued cooking setting has
been chosen (see chart).
As the higher continued cooking
settings are generally used for frying
food (and boiling large quantities of
water), only a relatively short heat-up
time is needed to heat up the pan
initially.
How to activate Auto heat-up
^ While a 0 is lit up in the cooking zone
display, touch the - sensor until the
required continued cooking setting
appears, e.g. 6.
During the heat-up time a dot will light
up to the right of the continued cooking
setting, and go out at the end of it.
At any point during the heat-up time
you can use - or + to increase or lower
the continued cooking setting. The Auto
heat-up time will alter accordingly.
In the extended range of settings (see
"Programming - P6."), A flashes
alternately with the continued cooking
setting until the heat-up time has
finished.
Continued
cooking setting*
1
1.
2
2.
3
3.
4
4.
5
5.
6
6.
7
7.
8
8.
9
* The continued cooking settings with
a dot after the number apply to the
extended power settings (see
"Programming - P6.").
Operation
Heat-up time
in minutes and
seconds
(approx.)
1 : 20
2 : 00
2 : 45
3 : 25
4 : 05
4 : 45
5 : 30
6 : 10
6 : 50
7 : 10
1 : 20
2 : 00
2 : 45
2 : 45
2 : 45
2 : 45
-
27