Miele KM 530 Operating And Installation Manual page 69

Making the worktop cut-out and
building in the hob
Granite and marble worktops
Worktop
Hob
Gap
Corner radius of the worktop ß R4
^ Make the worktop cut-out as shown
in the drawings.
^ Feed the hob connection cable down
through the cut-out.
^ Centre the hob
^ Connect the hob to the mains.
^ Check that the hob works.
^ Seal the remaining gap
silicone sealant that is heat-resistant
to at least 160 °C.
As the ceramic glass and the
worktop cut-out have a certain
dimensional tolerance, gap
vary (min. 2 mm).
Installation
in the cut-out.
with a
can
69