Switching Off And Residual Heat Indicators - Miele KM 453 Operating Instructions Manual

Switching off and residual heat
indicators
To switch off a cooking zone:
^ Touch the - and + sensors for the
zone you want to switch off at the
same time.
A 0 will light up in the display for that
zone for a few seconds. If the cooking
zone is still hot, residual heat will then
be indicated in the display by three
stacked horizontal lines.
To switch off the hob:
^ Touch the ON / OFF sensor s.
This switches off all cooking zones. If
any cooking zone is still hot, then
residual heat will be indicated in its
display.
The lines go out one after another as
the cooking zones cool down. The last
horizontal line only goes out when the
cooking zones are safe to touch.
If residual heat indicators are on, do
not touch the cooking zones or
place any heat sensitive object on
them.
Danger of burning and fire.
If there is an interruption to the
power supply, the residual heat
indicators will flash on and off.
Use
21