Double Auto Feed System; How To Trim And Edge - Flymo Twist n Edge Trimmer Owner's Manual

How the automatic line feed works (H)
is quite normal.
• Make sure the motor is up to full speed before
trimming or edging.
• WARNING
• The use of eye protection is recommended.
Do not lean over the trimmer whilst trimming or
edging, objects may be thrown by the cutting line.
Do not allow cutting head to rest on the ground.
Do not overload your trimmer. Overloading can be
avoided by making sure the motor speed does not
drop unduly.
DISCONNECT FROM THE MAINS ELECTRICITY
SUPPLY BEFORE ATTEMPTING ANY MAINTE-
NANCE OR ADJUSTMENT.
• BEFORE USE
Make sure that both lines are fed out.
• Make sure motor is up to full speed before trim-
ming or edging.
How to trim
Fig L
L.
See Fig M.
page 5.
How to edge
Fig P
fig P
Ensure the electric cable is not snagged or pulled
around sharp objects.

Double Auto Feed System

DO NOT BE ALARMED this

How to trim and edge

(J)
(K)
See Fig
(J)
(N)
H
J
K
M
N
L
P
4